FOTO |
Cod |
Description |
€ |
|
MINP650.3.2 |
kit radial system standard hp 10 d.40×42 mozzo d.47 – # 48,00. Alluminium cylinder with rod cast iron, 2 transfer, standard piston with 2 compression rings |
320,00 |
|
MINP650.3.3 |
kit radial system standard hp 15 competition d.40×42 mozzo d.47 – # 48,00 Alluminium cylinder with rod cast iron, 3 transfer, special piston with 1 compression rings L |
535,00 |
|
MINP650.4 |
kit corsa corta nikasil standard hp13,5 d.40,3×39 – bore d.47 – # mm.48 |
535,00
|
|
MINP650.4.1 |
kit corsa corta nikasil racing hp16,5 d.40,3×39 – bore d.47 – # mm.48
* cast piston 1 special L segment, complete with d.32 ergal exhaust manifold, machined from solid, mounted on the cylinder. * |
760,00
|
|
MINP650.4A |
kit nikasil standard hp13,5 d.40,3×42 – bore d.47 – # mm.48
** The ORIGINAL CARTER SHOULD NOT BE ENLARGED AND LOWERED.** |
535,00 |
|
MINP650.4B |
kit nikasil racing hp16,5 d.40,3×42 – bore d.47 – # mm. 48
* cast piston 1 special L segment, complete with d.32 ergal exhaust manifold, machined from solid, mounted on the cylinder. ****The ORIGINAL CARTER SHOULD NOT BE ENLARGED AND LOWERED. ** |
760,00 |
|
MINP650.5 |
set crankase racing (left+right) d.52 |
sold out |
|
MINP650.5.1 |
set crankase racing (left+right) d.54 |
sold out |
|
MINP650.5.2 |
gasket set engine air system |
40,00 |
|
MINP650.5.3 |
oil seal set standard engine complete |
40,00 |
|
MINP650.5.4 |
special oil seal set engine complete |
65,00 |
|
MINP650.6 |
Set bearing gear |
55,00 |
|
MINP650.7 |
SERIE ASTUCCI A RULLI cambio |
50,00 |
|
MINP650.7.1 |
SERIE BOCCOLE CAMBIO |
40,00 |
|
MINP650.8 |
set special gear 1st and 2nd Z11-32 // 14-29 |
335,00 |
|
MINP650.8.1 |
set special gear 5th and 6th Z19-24 // Z20-23 for cross and speed |
300,00 |
|
MINP650.8.2 |
Primary gear Z11-14 |
315,00 |
|
MINP650.8.3 |
Set special gear complete (Z 11-14-16-18-19-20 // 32-29-27-25-24-23) for cross and speed |
995,00 |
|
MINP650.9 |
standard crankshaft x39 complete mm.17 |
270,00 |
|
MINP650.9.1 |
standard crankshaft x42 complete mm. |
270,00 |
|
MINP650.9.2 |
racing crankshaft x39 complete mm.17 |
520,00 |
|
MINP650.9.3 |
racing crankshaft x42 complete mm.17 |
520,00 |
|
MINP650.9.4 |
set special bearing for crankshaft |
130,00 |
|
MINP650.10 |
piston complete d.38,8 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.1 |
piston complete d.39 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.2 |
piston complete d.39,2 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.3 |
piston complete d.39,4 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.4 |
piston complete d.39,6 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.5 |
piston complete d.39,8 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.6 |
piston complete d.40 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.7 |
piston complete d.40,2 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.8 |
piston complete d.40,3 standard with hole for the third transfer port corsa corta – specify the selection.
A= 40,285B= 40,280C= 40,275D= 40,270
E= 40,265
F= 40,260
G=40,255 |
150,00 |
|
MINP650.10.9 |
piston complete d.40,4 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
sold out |
|
MINP650.10.10 |
piston complete d.40,6 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
sold out |
|
MINP650.10.11 |
piston complete d.40,8 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.12 |
piston complete d.41 standard
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
90,00 |
|
MINP650.10.13 |
piston complete d.38,8 racing
NOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops |
140,00 |
|
MINP650.10.20 |
piston complete d.40,3 racing with third hole for the transfer port corsa corta – specify the selection A – G – F – D |
162,00 |
|
MINP650.11 |
Cover clutch |
148,00 |
|
MINP650.12.2 |
unit with 3 outputs with attack of the tachometer (Motoplat) |
205,00 |
|
MINP650.12.3 |
Motoplat unit with increased spark |
128,00 |
|
MINP650.12.4 |
flyweel inside minirotor left or right rotation fixed ingnition with electronic unit without light d.36mm. #20mm. |
240,00 |
|
MINP650.12.5 |
flywheel outside rotor left rotation Ducati fixed ignition with electronic unit with light |
390,00 |
|
MINP650.12.6 |
electronic ignition system, internal rotor, fixed for speed, cross, racing engines |
450,00 |
|
MINP650.12.6A |
electronic ignition system 12v 100w with light for cross – regularity – street engines |
380,00
momentaneamente non disponibile |
|
MINP650.13.6 |
set carburetor PHBH 30 |
410,00 |
|
MINP650.13.6A |
set carburetor PHBH 26 |
265,00 |
|
MINP650.13.6B |
set carburetor PHBH 28 |
265,00
|
|
MINP650.13.6C |
Intake manifold in ergal machined from solid, for Minarelli P6 50 engines with traditional intake (no rotating disc) d. 26. anodized gold color |
47,00 |
|
MINP650.13.6D |
Intake manifold in ergal machined from solid, for Minarelli P6 50 engines with traditional intake (no rotating disc) d. 28 anodized gold color |
49,00 |
|
MINP650.13.6E |
Intake manifold in ergal machined from solid, for Minarelli P6 50 engines with traditional intake (no rotating disc) d. 30. anodized gold color |
52,00 |
|
MINP650.13.6F |
Ergal exhaust manifold, machined from solid, for Minarelli P6 50 engines – with traditional intake and rotating disc d.32 anodized black color
|
52,00 |
|
MINP650.14 |
exhaust *handmade* for rotating and non-rotating disk engines.Composed into 3 pieces to be welded on site on the frame. |
490,00 |
|
MINP650.14CC |
exhaust *handmade* for rotating and non-rotating disk engines, corsa corta. Composed into 3 pieces to be welded on site on the frame. |
490,00 |
|
MINP650.14.1 |
decomposed exhaust system for competition, high, regularity and cross |
202,00 |
|
MINP650.15 |
alluminium sylencer hand made |
145,00 |
|
MINP650.16 |
primary drive straight teeth Z12/64 extra wheel (kg.0,700) regularity |
290,00 |
new |
MINP650.16.1 |
Gear primary drive Z 16/61 with ergal basket, machined from solid, lightened and reinforced with anti-wear treatment complete with roller cagesversion cross – speed circuit |
390,00 |
new |
MINP650.16.2 |
special complete inside clutch 6 spring 10 marks competition ergal, machined from solid, lightened and reinforced with anti-wear treatment |
|
345,00
|
|
MINP650.16.3 |
set 6 special springs for clutch 10 marks |
65,00 |
|
MINP650.16.4 |
set clutch disks for clutch with 6springs and 10 marks |
49,00 |
|
MINP650.16.5 |
set clutch discs plate for clutch with 6 springs and 10 marks |
49,00 |
|
MINP650.16.5A |
KIT COMPLET DRY CLUTCH 6 SPRINGS 10 MARKS (**) |
1.350,00
TEMPORARILY NOT AVAILABLE |
|
MINP650.16.6 |
special complete inside clutch 4 springs 10 marks competition |
175,00 |
|
MINP650.16.7 |
set 4 special springs for clutch 10 marks |
36,00 |
|
MINP650.16.8 |
set clutch discs for clutch with 4 springs 6 marks |
39,00 |
|
MINP650.16.9 |
set clutch disks plate for clutch with 4 springs 6marks |
43,00 |
|
MINP650.16.10 |
center clutch ergal for 6 springs with keys-steel for reinforced with Hard anodizing 30 micron + Teflon
|
180,00 |
|
MINP650.MOT1 |
Engine 50cc 40,3 x39 ((SHORT STROKE) version:
a) speed circuit
b) regularity
c) cross
air system
standard hp 13,5
* With 12v electronic ignition and lights
* No exhaust
* No carburetor |
request a quote with specific technical specifications |
|
MINP650.MOT2 |
ENGINE 50 d. 40,3×39 (SHORT STROKE) – AIR SYSTEM – FOR SPEED CIRCUIT – HP 16,5
* with set carburator d.30, exhaust decomposed to be welded in place on the frame, electronic ignition with lights |
request a quote with specific technical specifications |