MINARELLI P6 50cc SPECIAL PARTS
PRICE LIST 12/02/2026
| FOTO | Cod | Description | € | |
 |
MINP650.3.2 | kit radial system standard hp 10 d.40×42 mozzo d.47 – # 48,00. Alluminium cylinder with rod cast iron, 2 transfer, standard piston with 2 compression rings | 320,00 | |
|
MINP650.3.3 | kit radial system standard hp 15 competition d.40×42 mozzo d.47 – # 48,00 Alluminium cylinder with rod cast iron, 3 transfer, special piston with 1 compression rings L | 535,00 | |
 |
MINP650.4 | kit corsa corta nikasil standard hp13,5 d.40,3×39 – bore d.47 – # mm.48Technical specifications:2 main transfers 1 rear booster |
535,00 not available | |
|
MINP650.4.1 | kit corsa corta nikasil racing hp16,5 d.40,3×39 – bore d.47 – # mm.48 * cast piston 1 special L segment, complete with d.32 ergal exhaust manifold, machined from solid, mounted on the cylinder. *Technical specifications:2 main transfers 1 rear booster |
760,00 not available | |
|
MINP650.4A | kit nikasil standard hp13,5 d.40,3×42 – bore d.47 – # mm.48** The ORIGINAL CARTER SHOULD NOT BE ENLARGED AND LOWERED.**Technical specifications:2 main transfers 1 rear booster |
535,00 not available | |
|
MINP650.4B | kit nikasil racing hp16,5 d.40,3×42 – bore d.47 – # mm. 48 * cast piston 1 special L segment, complete with d.32 ergal exhaust manifold, machined from solid, mounted on the cylinder. ****The ORIGINAL CARTER SHOULD NOT BE ENLARGED AND LOWERED. ** |
760,00 not available | |
 |
MINP650.5 | set crankase racing (left+right) d.52 | ||
|
MINP650.5.1 | set crankase racing (left+right) d.54 | ||
 |
MINP650.5.2 | gasket set engine air system | 40,00 | |
 |
MINP650.5.3 | oil seal set standard engine complete | 40,00 | |
 |
MINP650.5.4 | special oil seal set engine complete | 65,00 | |
 |
MINP650.6 | Set bearing gear | 55,00 | |
 |
MINP650.7 | ROLLER CASE SERIES gearbox | 50,00 | |
 |
MINP650.7.1 | GEARBOX BUSHING SET | 40,00 | |
 |
MINP650.8 | set special gear 1st and 2nd Z11-32 // 14-29 | 335,00 | |
 |
MINP650.8.1 | set special gear 5th and 6th Z19-24 // Z20-23 for cross and speed | 300,00 | |
 |
MINP650.8.2 | Primary gear Z11-14 | 315,00 | |
 |
MINP650.8.3 | Set special gear complete (Z 11-14-16-18-19-20 // 32-29-27-25-24-23) for cross and speed | 995,00 | |
 |
MINP650.9 | standard crankshaft x39 complete mm.17 | 270,00 | |
|
MINP650.9.1 | standard crankshaft x42 complete mm. | 270,00 | |
|
MINP650.9.2 | racing crankshaft x39 complete mm.17 | 520,00 | |
|
MINP650.9.3 | racing crankshaft x42 complete mm.17 | 520,00 | |
 |
MINP650.9.4 | set special bearing for crankshaft | 130,00 | |
 |
MINP650.10 | piston complete d.38,8 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.1 | piston complete d.39 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.2 | piston complete d.39,2 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.3 | piston complete d.39,4 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.4 | piston complete d.39,6 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.5 | piston complete d.39,8 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.6 | piston complete d.40 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.7 | piston complete d.40,2 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
 |
MINP650.10.8 | piston complete d.40,3 standard with hole for the third transfer port corsa corta – specify the selection: A= 40,285B= 40,280C= 40,275D= 40,270E= 40,265F= 40,260G=40,255 |
175,00 | |
|
MINP650.10.9 | piston complete d.40,4 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | sold out | |
|
MINP650.10.10 | piston complete d.40,6 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | sold out | |
|
MINP650.10.11 | piston complete d.40,8 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
|
MINP650.10.12 | piston complete d.41 standardNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 90,00 | |
 |
MINP650.10.13 | piston complete d.38,8 racingNOTES: Specify the shape of the sky (convex or flat) and the position of the segment stops | 140,00 | |
|
MINP650.10.20 | piston complete d.40,3 racing with third hole for the transfer port corsa corta – specify the selection:A= 40,285B= 40,280C= 40,275D= 40,270E= 40,265
F= 40,260 G=40,255 |
225,00 | |
 |
MINP650.11 | Cover clutch | 148,00 | |
 |
MINP650.12.2 | unit with 3 outputs with attack of the tachometer (Motoplat) | 205,00 | |
 |
MINP650.12.3 | Motoplat unit with increased spark | 128,00 | |
 |
MINP650.12.4 | flyweel inside minirotor left or right rotation fixed ingnition with electronic unit without light d.36mm. #20mm. | 240,00 | |
 |
MINP650.12.5 | flywheel outside rotor left rotation Ducati fixed ignition with electronic unit with light | 390,00 | |
 |
MINP650.12.6 | electronic ignition system, internal rotor, fixed for speed, cross, racing engines | 450,00 | |
 |
MINP650.12.6A | electronic ignition system 12v 100w with light for cross – regularity – street engines |
|
|
 |
MINP650.13.6 | set carburetor PHBH 30COMPOSED OF:PHBH D.30 carburetorErgal intake manifold, machined from solid d.30Mesh filter (horn) | 440,00 | |
 |
MINP650.13.6A | set carburetor PHBH 26COMPOSED OF:PHBH D.26 carburetorErgal intake manifold, machined from solid d.26Mesh filter (horn) | 345,00 | |
|
MINP650.13.6B | set carburetor PHBH 28COMPOSED OF:PHBH D.28 carburetorErgal intake manifold, machined from solid d.28Mesh filter (horn) | 345,00 | |
 |
MINP650.13.6C | Intake manifold in ergal machined from solid, for Minarelli P6 50 engines with traditional intake (no rotating disc) d. 26. anodized gold color | 47,00 | |
|
MINP650.13.6D | Intake manifold in ergal machined from solid, for Minarelli P6 50 engines with traditional intake (no rotating disc) d. 28 anodized gold color | 49,00 | |
|
MINP650.13.6E | Intake manifold in ergal machined from solid, for Minarelli P6 50 engines with traditional intake (no rotating disc) d. 30. anodized gold color | 52,00 | |
 |
MINP650.13.6F | Ergal exhaust manifold, machined from solid, for Minarelli P6 50 engines – with traditional intake and rotating disc d.32 anodized black color |
52,00 | |
 |
MINP650.14 | exhaust *handmade* for rotating and non-rotating disk engines. | 490,00 | |
|
MINP650.14CC | exhaust *handmade* for rotating and non-rotating disk engines, corsa corta. | 490,00 | |
 |
MINP650.14.1 | decomposed exhaust system for competition, high, regularity and cross | 202,00 | |
 |
MINP650.15 | alluminium sylencer hand made | 145,00 | |
 |
MINP650.16 | primary drive straight teeth Z12/64 extra wheel (kg.0,700) regularity | 290,00 | |
 new |
MINP650.16.1 | Gear primary drive Z 16/61 with ergal basket, machined from solid, lightened and reinforced with anti-wear treatment complete with roller cagesversion cross – speed circuit | 390,00 | |
 new |
MINP650.16.2 |
|
345,00 | |
 |
MINP650.16.3 | set 6 special springs for clutch 10 marks | 65,00 | |
 |
MINP650.16.4 | set clutch disks for clutch with 6springs and 10 marks | 49,00 | |
 |
MINP650.16.5 | set clutch discs plate for clutch with 6 springs and 10 marks | 49,00 | |
 |
MINP650.16.5A | NEW DRY CLUTCH WITH 6 SPRINGS 10 NOTCHES RACINGTechnical specifications:Primary transmission cover (crankcase), in ergal, machined from solid, gold anodized;Primary transmission Z16-61 in special steel;Disc holder bell in ergal, machined from solid, with anti-wear treatment;Clutch drum, in ergal, machined from solid, with anti-wear treatment;
Spring holder plate, in ergal, machined from solid, with anti-wear treatment; Special and specific springs; Special lined and steel discs. |
1.490,00 | |
 |
MINP650.16.5B | set 6 special springs clutch – for dry clutches — FOR DRY CLUTCHES – | 75,00 | |
 |
MINP650.16.5C | 5 GARNISHED CLUTCH DISCS FOR CLUTCH WITH 6 SPRINGS 10 NOTCHES – FOR DRY CLUTCHES – | 65,00 | |
 |
MINP650.16.5D | 5 STEEL CLUTCH DISCS for 6 spring clutch 10 notches – – FOR DRY CLUTCHES – | 65,00 | |
 |
MINP650.16.6 | special complete inside clutch 4 springs 10 marks competition | 175,00 | |
 |
MINP650.16.7 | set 4 special springs for clutch 10 marks | 36,00 | |
 |
MINP650.16.8 | set clutch discs for clutch with 4 springs 6 marks | 39,00 | |
 |
MINP650.16.9 | set clutch disks plate for clutch with 4 springs 6marks | 43,00 | |
  |
MINP650.16.10 |
center clutch ergal for 6 springs with keys-steel for reinforced with Hard anodizing 30 micron + Teflon
|
180,00 | |
| MINP650.MOT1 | Engine 50cc 40,3 x39 ((SHORT STROKE) version: a) speed circuit b) regularity c) cross air system standard hp 13,5 * With 12v electronic ignition and lights * No exhaust * No carburetor |
request a quote with specific technical specifications | ||
| MINP650.MOT2 | ENGINE 50 d. 40,3×39 (SHORT STROKE) – AIR SYSTEM – FOR SPEED CIRCUIT – HP 16,5 * with set carburator d.30, exhaust decomposed to be welded in place on the frame, electronic ignition with lights |
request a quote with specific technical specifications |
